Roll 13 was another outing for the little Vito C which is now light-leak free. Actually I loaded this roll of FujiFilm Fuji Pro 400 a few weeks ago and took a shot here and there which is how I am likely to use this camera going forward; just a camera to keep handy.
After my recent experience with a light leak on a TLR and another leak on a compact 35mm, I realized that there was very little information online about how to go about diagnosing these kinds of issues and thus fixing them. Most of the tutorials online that mention “light leaks” seem just to talk about replacing the foam seals around the door; which is fine for a certain age of camera and if that is where the light is coming in.
With both of my issues this was unhelpful and so I thought perhaps I would share my thought process in tackling these leaks; apologies if this is a case of ‘teaching your grandmother to suck eggs’ and maybe a lot of this is obvious for some of you – please chime in if you have techniques I don’t mention.
So first off, if the foam seals are deteriorating then of course replacing them is a fairly simple and cheap exercise that is worth doing anyway and may well resolve the issue. In my case this was not required for either camera.